Tubing Connectors and Fittings
Chemglass Life Sciences Adapter, Trap Connection, Airfree, Schlenk
Adapter, Trap Connection, Airfree, Schlenk. Used to connect the AF-0300-13 manifold to the AF-0300-04 trap assembly. Adapter has a 0-20mm Chem-Cap valve with two #20 o-ring joints. Supplied complete with two #214 Viton o-rings.
Chemglass Life Sciences 14/20 Joint Size, 1/4" Thermometer Size, #108 Upper O-Ring, #013 Lower O-Ring
14/20 Joint Size, 1/4" Thermometer Size, #108 Upper O-Ring, #013 Lower O-Ring. PTFE adapter for use with 1/4 thermocouples. Adapter has an outer Perfluoro o-ring to form a grease-free, airtight seal between the adapter and the listed size of outer joint. The compression nut works in conjunction with the upper Perfluoro o-ring to provide a airtight seal between the adapter and thermocouple. Adapter design permits use with CG-145 Keck clips.
Chemglass Life Sciences Adapter, Distillation, 105°, 14/20 Joint Size
Adapter, Distillation, 105, 14/20 Joint Size. Distillation adapter with sealed in lower drip tip and top outer joints, both being the same size.
Chemglass Life Sciences 10/30 Outer Joint, Full Length, on 14mm OD x 1.2mm W tubing
10/30 Outer Joint, Full Length, on 14mm OD x 1.2mm W tubing. Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.
Chemglass Life Sciences 45/50 Outer Joint, 16in OAL, on 57mm OD x 2.4mm W tubing
45/50 Outer Joint, 16in OAL, on 57mm OD x 2.4mm W tubing. These joints offer the glassblower the opportunity to construct apparatus made of heavier tubing or without unnecessary seals.
Chemglass Life Sciences 24/40 Adapter, Connecting, Height 80mm
24/40 Adapter, Connecting, Height 80mm. Adapter has a luer outer on top and a lower standard taper inner joint.
Chemglass Life Sciences 24/40 Outer Joint with Hooks, on 28mm OD x 2mm W tubing
24/40 Outer Joint with Hooks, on 28mm OD x 2mm W tubing. Outer joint with two hooks 180 apart just below the grind.
Beckman Coulter Tube Holder Adapter for 14 mm Diameter Tubes
The Beckman Coulter D30246 tube adapter enables 14 mm diameter tubes to be used in compatible Beckman tube holders and instruments, providing a secure and centered fit so smaller tubes can be processed in equipment designed for larger tube sizes.
- Accommodates tubes with a 14 mm outer diameter.
- Provides a secure fit in compatible tube holders.
- Enables use of smaller tubes in instruments designed for larger diameters.
- Simplifies sample handling and setup for routine laboratory workflows.
- Reusable design suitable for repeated use in standard lab applications.
Mitegen Plates, XJR Crystallization, Case Of 40
The Compact 300 Crystallization plate utilizes our patented sitting drop well design and vapor diffusion channel. This plate has 96 reservoirs with 96 drop chambers.-Plate dimensions are 85.5mm x 127.8mm x 14.4mm-Plates are compatible with SBS (Society for Biomolecular Screening) standard laboratory automated instrumentation.-Drop chambers are 9mm apart in both horizontal and vertical directions for eay use with multi-channel pipettors.-The reservoir volume is 300 microliters.-The drop chamber volume is 6 microliters.
Cole-Parmer Hose Barb Fitting, Straight Reducer, Natural Kynar, Cleanroom Packed, 1/2" ID x 1/4" ID; 10/Pk
Use these high-quality PVC-free fittings in biomedical, pharmaceutical, electronic, and other critical-use applications. Fittings are manufactured, double bagged, and sealed in an ISO Class 7 cleanroom to ensure that the integrity is not compromised. An ISO Class 7 cleanroom utilizes HEPA filtration systems to maintain air cleanliness levels of less than 10,000 particles of 0.5 µm or larger per cubic foot.
Easily connect two different size tubing with straight reducers. A single barb on each end of the fitting creates a tight seal to keep the tubing in place. These natural Kynar fittings provide excellent chemical, flame, gamma radiation, UV, and weather resistance. They also exhibit good mechanical properties, low moisture absorption, and good machinability.
Cole-Parmer Hose Barb Fitting, Straight Reducer, Natural Kynar, Cleanroom Packed, 3/8" ID x 5/32" ID; 10/Pk
Use these high-quality PVC-free fittings in biomedical, pharmaceutical, electronic, and other critical-use applications. Fittings are manufactured, double bagged, and sealed in an ISO Class 7 cleanroom to ensure that the integrity is not compromised. An ISO Class 7 cleanroom utilizes HEPA filtration systems to maintain air cleanliness levels of less than 10,000 particles of 0.5 µm or larger per cubic foot.
Easily connect two different size tubing with straight reducers. A single barb on each end of the fitting creates a tight seal to keep the tubing in place. These natural Kynar fittings provide excellent chemical, flame, gamma radiation, UV, and weather resistance. They also exhibit good mechanical properties, low moisture absorption, and good machinability.
Cole-Parmer Hose Barb Fitting, Straight Reducer, Natural Kynar, Cleanroom Packed, 5/8" ID x 1/4" ID; 10/Pk
Use these high-quality PVC-free fittings in biomedical, pharmaceutical, electronic, and other critical-use applications. Fittings are manufactured, double bagged, and sealed in an ISO Class 7 cleanroom to ensure that the integrity is not compromised. An ISO Class 7 cleanroom utilizes HEPA filtration systems to maintain air cleanliness levels of less than 10,000 particles of 0.5 µm or larger per cubic foot.
Easily connect two different size tubing with straight reducers. A single barb on each end of the fitting creates a tight seal to keep the tubing in place. These natural Kynar fittings provide excellent chemical, flame, gamma radiation, UV, and weather resistance. They also exhibit good mechanical properties, low moisture absorption, and good machinability.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Polycarbonate, Straight, Flexible PVC Tubing with Female/Male Luer Ends, 24"" Long; 5/PK
This high pressure flexible PVC tubing has luer fittings at each end and comes in various lengths. Can be sterilized by ETO.
